Home > News > lab Rotary Evaporator
lab Rotary Evaporator

lab Rotary Evaporator


Features of Lab Rotary Evaporator

1. The motor of Rotary Evaporator has stepless speed regulation and automatic lifting function of 10-120rpm. The rotating body is composed of a set of stable and reliable micro motor, speed measuring motor and integrated circuit control device. Under the action of electronic speed regulation, it can rotate stably within the range of 10-120rpm and has reached the advanced level at home and abroad.

2. Quick and easy lifting mechanism

The lifting system of rotating body moving up and down adopts screw lifting mechanism. Rotate the hand wheel connected to the screw rod, and the rotating body, rotary device, evaporator bottle, condenser and collecting bottle can be raised or lowered simultaneously, with the maximum lifting distance of 120mm.

3. Evaporator along the horizontal direction in 0-45 ℃ within the scope of any tilt

The rotating body is connected with the lifting system, and the rotating shaft and the rotating sleeve can rotate the rotating body, the rotary device, the evaporator, the condensing bottle and the collecting bottle together, so that the rotating body is inclined to an Angle along the horizontal direction.

4. Vertical condensation system with high evaporation rate

The condenser has two types of structures, one is the principle of double pipeline convection, used to evaporate inorganic solvents, and the other is a single pipe with interlayer of water cooling and containers with ice and dry ice. Used to vaporize organic solvents. Vertical condenser is used to reduce the space.

5. Vacuum seal system

The evaporator tube is made of polytetrafluoroethylene plastic with good properties. The joint is sealed with tetrafluorine, and the effect is good.

6. Automatic temperature display

The device is equipped with a temperature indicator. Temperature has digital display, temperature control by Cu50 sensor implementation. When the water temperature reaches the preselected temperature, the controller automatically cuts off the heater power. The controller is automatically connected to the heater when the water temperature is lower than the water temperature; Therefore, the water temperature in the tank is constant.

Share to:  
Previous: Promotion of rotary evaporator in December Next: LG-30 food type freeze drye installation in Turkey
Communicate with Supplier?Supplier
kevin Mr. kevin
What can I do for you?
Chat Now Contact Supplier