Home > Video > Video Dispaly

Video dispaly

  • 37 Organizing ideas #1 [With Dollar Store Organizing Tips]

    2019-03-23

    Information related to our 37 organizing video ideas Part 1 This part has 25 ideas actually: ———– Previously: 44 Organizing ideas ► Next: 37 Organizing ideas #2 ► ————— INFO: Press CC to turn ON/OFF subtitles ————— 1.►0:19|Tension rods also make easy scarf hangers.►1:03|Use a shoe organizer to organize socks and underwear. imgur. com/7w5MaQt3.►1:10|Make rack organizers out of old CDs. buy them from the Container Store.►2:13|Get cutlery trays and command hooks to organize your jewelry.►2:57|Use ice cube trays to organize tiny things, like earrings and other jewelry. @nickandcaeli.blogspot//goo.gl/1VSyfT6.►3:30|A corral wrapping paper.►3:35|The Pinterest crafting projects//mrswhite1103.blogspot.com/2012/07/another-pinterest-crafting-project.html8.►3:50|Need shelving for your desk? Use shoe racks. @mrsverdon9.►3:56|Use magnetic strips to organize your bobbins.►4:00|Use Tic Tac containers to organize and dispense ribbon.►4:31|Use a magnetic knife strip to organize tools and scissors. LINK MISSING12.►4:35|Glue washers to the bottom of plastic containers and stick them to a magnetic storage strip solution.►5:23|Storage for paint tubes.►5:45|Keep the thread and buttons from your clothing in a binder or photo album.►5:50|Use a shower caddy to make a gift wrapping station.►6:12|Use PVC pipes to organize your garden tools in the shed.►6:19|Make memory boxes for each kid.►6:34|a master hamper control center for each family member. Maker:Creative Commons Attribution license (reuse allowed)19.►11:51|Cut up a shoe organizer to create an over-the-seat caddy for your car.►12:17|A simple paper envelope holder//►12:56|Keep your games and cards in uniform boxes.►13:00|Attach wire bins where you need them with command hooks.►13:23|Use a pegboard to get your laundry room neat//►13:31|Luggage tags are an easy way to label baskets.►13:40|A pretty corral pool supplies outside.—— Music: NoCopyrightSounds, music without limitations. Syn Cole – Feel Good [NCS Release] Link: Syn Cole • • =============== More decor ideas: time I checked links 5/22/17 Press CC to turn on or turn off subtitles

  • Ice Cube Maker Ice Genie Silicone Ice Tray Mold

    2019-03-23

  • Skull Shape 3D Ice Cube Mold Maker Review #Jelloshots

    2019-03-23

  • Danby Dim2500wdb Portable Ice Maker White

    2019-03-23

    Get more info on Amazon-US: s features a see-through window and durable exterior. This model fits in effortlessly with your room’s existing décor. The R134a refrigerant makes it environmentally friendly and it can out as much as 25 lbs of each and every day in cho of 3 different cube sizes. The unit also store up to 2 of at a time. You’ll never have to guess when the container is full as a state-of-the-art alarm will let know. This chic comes with a scoop and the electronic Led controls it easy to program. Plus, there’s no need to fuss over the as it’s equipped with a self-cleaning function. Package Content: scoopmanualwarranty Simple with display Environmentally Includes Color Height 13.25 Width 11.63 Depth 14.19 Weight 21.00 Operating Batteries Included Required Number of 0 Battery Type Does Not a Language English Assembly

  • TecTake – Eiswürfelmaschine – Eisbereiter – Icemaker – Ice Cube Maker

    2019-03-23

    TecTake Eiswürfelmaschine – In wenigen Minuten perfekte EiswürfelWir haben für dich mehrere Eiswürfelmaschine verglichen. TecTake ist eine davon. Es sind viele Eiswürfelmaschinen in unserem Vergleich.

  • DIY Stove top oven ( Disposable Aluminum pans) tutorial

    2019-03-23

    DIY Stove top oven ( Disposable Aluminum pans) tutorial – DIY Stove top oven ( Disposable Aluminum pans) demoThe paper around the ties can be be removed .by burning them away with a lighter. take the necessary precautions when doing this The pan slides easily so be carefull after use open top lid with oven mits as it will be very hot!!DIY IMPROVISED STOVE TOP OVEN WITH DISPOSABLE ALUMINIUM PANS Be carefull when cutting the Aluminium pans the edges will be sharp and you can cut yourself.Don’t be like Julia Childs in this clip LOL Give it a likealso check out: This is a tutorial on how to fill an ice cube bag.Because they are thin and the photo demo is vague on the back of the product I thought a video would be a better demo. How to fill an ice cube bag. Ice cube bag Ice cube maker bagGive it a like !also check out: View full recipe at …Learn how to make Pizza on the Stove Top by Manjula.Ingredients For Dough 1 cup all-purpose flour (plain flour or maida) 1/2 teaspoon baking powder½ teaspoon baking soda ½ teaspoon salt ½ teaspoon sugar 2 tablespoons thick yogurt (curd or dahi) room temperature Approx. 1/3 cup lukewarm water use as needed About 2 tablespoon all-purpose flour needed to roll the dough Sauce 1-1/2 cups tomatoes seeded and chopped in small pieces 1/4 teaspoon salt 1/2 teaspoon sugar 1/2 teaspoon Italian seasoning optional 1/2 teaspoon crushed red pepper 1 tablespoon olive oil Topping 1/2 cup bell pepper cut into small pieces, 1/4 cup mushrooms sliced About 3/4 cup mozzarella cheese shredded

  • TecTake – Eiswürfelmaschine – Eisbereiter – Icemaker – Ice Cube Maker

    2019-03-23

    Funktionsweise der TecTake Eiswürfelmaschine. Frische, kühle Eiswürfel für heiße Tage!Online Shop Deutschland: Online Shop Schweiz: Online Shop Italy: Online Shop France: Online Shop Netherlands:

  • Portable Ice Maker w LCD Display 2 8 Liter Water Reservoir, 3 Selectable Cube Sizes Yield of

    2019-03-23

    Portable w LCD Display 2 8 Liter Water Reservoir, 3 Selectable Cube Sizes Yield of , Portable w LCD Display 2 8 Liter Water Reservoir, 3 Selectable Cube Sizes Yield of

  • Water Heater Thermo Coupling And Burner Assemble 1 of 2

    2019-03-23

    Check your Bradford White Water heater Warranty. First get the serial number and modal off the side of the water heater,…Bradford White’s limited warranty covers both the glass-lined tank and component parts for leakage or other malfunction caused by defects in materials and/or workmanship. It extends to the first buyer and to any subsequent owner(s) as long as the water heater remains installed at its original place of installation. Warranties are packaged with each water heater along with installation instructions. If missing or misplaced, you can download and print a copy of the warranty from the listing shown under Warranty Documents at right. Items Not Covered Under Warranty Include: • Dry-fired elements • Temperature adjustments • T & P valve failures/function (unless supplied with the unit by BWC) • Air shutter adjustments • No electric or gas supplied to water heater • Poor or improper venting • Not enough hot water because of sizing or overuse • Improper wiring to water heater • Diagnostic calls • Undersized gas piping to water heater • Lack of combustion air • Water odors • Noise because of minerals or sediment • Removal or replacement of anode rods • Anode consumption • Improper installation • Failure because of excessive pressure • Thermal expansion • Damage caused by flooding, exposure to weather or negligence • In some areas of the country, water heaters, both gas and electric, are installed in attic spaces. As with all gas water heater installations, it is very important to have sufficient combustion and dilution air to insure proper drafting of the exhaust products and safe water heater operation. • As outside temperatures increase, the need for proper combustion air and attic ventilation becomes even more critical. For reference, if not ventilated adequately, attic space temperatures can go as high as 160 degrees Fahrenheit. This can occur when outside air temperatures are only in the 90′s; even when the sky is cloudy. • As the pilot flame burns, it requires oxygen from the air. The exhaust products from the pilot flame are then designed to rise through the combustion chamber and water heater flue, exiting the roof through the chimney system. This “draft”, while removing exhaust products, also brings in “fresh” air to the combustion chamber. • For the exhaust gases to rise through the water heater and chimney system, they must have a temperature much greater than their surroundings. Elevated attic temperatures make it extremely difficult, or impossible, for the water heater combustion system to properly “breath”. Without the ability to sustain the main burner and pilot flame with fresh air, the pilot flame will become unstable, and may eventually go out. When this occurs, the water heater will not function. • To avoid these water heater outages, proper attic ventilation must be present. Examples of common practices to insure sufficient attic ventilation include soffit vents used in combination with ridge vents and/or mechanical attic exhaust fans which are turned on and off via temperature controls. • Soffit and ridge vents allow for natural convection of the hot attic air to be removed form the attic, and fresh air to enter at or near the floor level of the attic. Mechanical attic exhaust fan systems power the air flow and may cycle on and off as the temperature rises and falls. Both are acceptable and common methods used. However, undersized, blocked or improperly located attic ventilation components result in elevated attic temperatures and possible water heater outages. Consult your local construction and roofing experts for further information about proper attic ventilation.

  • Kamenov Rotary Reciprocating Internal Combustion Engine Prototype

    2019-03-23

    Available for Licence – US Patent 8230836 Contact: See: Kamenov Rotary Reciprocating Internal Combustion Engine Animation on Youtube:In this engine there is only ONE moving part with 2 small vanes. There is no camshaft. Notice that there are two cylinders on one common shaft. There are two moving vanes and two stationary vanes. They form 4 chambers. Now you have 2 cylinders and 4 chambers vs. classical engine 4 cylinders and 4 chambers. In this Rotary Engine you have one rotation of the main shaft each time there is a spark in one of the working chambers. In the classical engine you need two rotations of the main shaft to get one spark in one of the four cylinders. Here is already 50% advantage over the conventional engine. There is no camshaft in this Rotary engine. All this and more makes it 4 times smaller compared to the classical engine. There is power-to-weight ratio advantage over the conventional engine. Other advantages of this engine are the small size which means that it is easy to manufacture using less time, material and energy. It has low maintenance cost and it will be less expensive. If installed on vehicles, only the small size and weight will save gasoline. Because of the small size it has much bigger output for the same volume compared to the conventional engine. Also because of the small size it may be used in helicopters or hybrid cars . It can also work as a pump or a compressor.SUMMARY AND OBJECTS OF THE INVENTION The multiple cylinder alternating vane rotary engine comprises a simple rotary vanes assemblage mounted within a plurality of cylindrical housings having fixed abutment walls and moving vanes and means for the intake and exhaust of combustible mixture. Between the vanes and the walls multiple chambers are formed, which change their volume. The chambers communicate between themselves via conduits, which carry fuel mixture from one chamber to another. Primary engine valving is accomplished by simple ports or apertures in the cylindrical housing and, or the end plates, also called heads, for the housing and by the reciprocating motion of the vane assemblage which opens and closes the apertures at the appropriate moment. The bi-directional rotation of the output shaft, upon which the vanes are mounted, may be made uni-directional by a well-known external gearing system.The primary object of the present invention is to provide a rotary internal combustion engine, which quickly, efficiently and economically converts thermal energy into usable kinetic energy.A further object of the present invention is to provide a power plant with essentially one moving element with concomitant savings in materials, weight, labor and manufacturing costs.A further object of the present invention is to provide a rotary engine with operating vanes wherein the forces on opposite sides of the vanes are essentially balanced and the vibrations are virtually eliminated. AbstractA highly efficient, low weight-to-power ratio and adjustable high compression, gasoline or diesel internal combustion engine consisting of a multitude of cylindrical casings parallel to each other or aligned sequentially on one axle. Each casing having one radially extending vane affixed to a shaft rotatably mounted within the casing upon two end plates and one longitudinally extending wall affixed on the inside of the casing. The casing and/or the end plates equipped with plurality of ports and conduits which enable communication between interior chambers of the cylinders, allowing for intake of combustible air-fuel mixture and exhaust thereafter. Ignition means delivering a spark at the end of each working cycle. An extendable and adjustable connecting rod assembly converting the oscillating bi-directional rotary motion of the power output shaft into a continuous unidirectional motion of the main shaft. A self lubricating mechanism incorporated into the engine.

  • Cast Aluminum Solutions semiconductor platens and circulation heaters

    2019-03-23

    Cast Aluminum Solutions supplies the semiconductor industry with precision-engineered thermal products such as platens, pedestal heaters, circulation heaters, plus a broad range of engineering & design services. CAS designs and manufactures these components for OEMs and end-users worldwide. This video illustrates the details of our most popular product categories, and gives viewers an overview of key engineering services, which include 3-D solid modeling, FEA thermal modeling, infrared technology, plus x-ray and ultrasound imaging, vacuum chamber testing, and life-cycle testing. With a robust manufacturing facility and large engineering staff, CAS delivers precision-engineered thermal solutions, from concept to large-scale production. Brands include CAST-X in-line circulation heaters, PUR-X in-line circulation heaters, plus our High-Temperature CAST-X line and our unique Universal Solvent Heater. These are utilized across many industries, from chemical processors, to oil & petrochem industries, industrial gas producers, the food & beverage sector, pharmaceutical & medical device, and the semiconductor industry, particularly wafer processors. Cast Aluminum Solutions also designs and manufactures a wide range of thermal products which are uniquely-designed for specific customers. CAS engineers and technicians help customers develop innovative solutions to complex thermal challenges. For more information about Cast Aluminum Solutions, CAST-X or PUR-X Circulation Heaters, or any of our exceptional engineering and design services, please call or click today. Main US Tel: 630-8798-2696 Toll-Free Tel: 888-367-3992 Email: Website:

  • Sterilizer and Depyrogenation tunnel dvd x264 x264

    2019-03-23

    Model: With belt width 300mm, 450 mm,600 mm, 750 mm , 900 mm & 1200mm.Output capacity: 90-300 vials/min 100-300 Ampoules Min 60-100 Bottles / Min as per Bottle sizeApplication: Pharmaceuticals,Food,Chemicals Industriessalient Features:*Stericlean hot laminar flow sterilization tunnel used for on line sterilization & depyrogenation for washed vials & ampoules,*class-100 laminar air flow Throughout drying, sterilizing, cooling & stabilizing zone.*Thyristorised temperature control for excellent power saving & thermal efficiency with uniform temperature in hot zone.* Automatic control through IC and on line printing Pharmaceutical Sterilizing TunnelOur clients avail from us Pharmaceutical Sterilizing Tunnel, which comes with printer online and PLC. Designed using FDA norms and cGMP parameters, this tunnel delivers reliable performance. It comprises of five units such as infeed drying zone, sterilizing zone, cooling zone, stabilizing zone and control panel.The infeed drying zone: To pre heat the vials and protect the vials from contamination, thermal barrier is created between sterilizing and vial washing chamber. Drying and pre heating of the vials take place as the pressure variation is adjusted for some hot air to flow from sterilizing zone to drying zone.The sterilizing zone: The sterilizing zone can be heated up to temperature of 350 degree C and is fully installed. By Incoly DS material heating elements, heat is generated. The function of the air temperature and air velocity is sterilizing time of the vials. The air velocity can be adjusted. To obtain a Log-3 pyrogen reduction, the thermal cycle is designed.Manufacturing divisionAstro Mech

Communicate with Supplier?Supplier
kevin Mr. kevin
What can I do for you?